Toll Blending Services in the UAE
You have the formulation. We have the plant. Contract blending to your exact specification at our ISO-certified facility in Hamriyah Free Zone, with your intellectual property protected.
What is Toll Blending?
Toll blending is contract manufacturing where you own the formulation, and we provide the production capacity. You supply the specification. We blend, test, package, and document to your requirements. The product remains yours throughout.
It is the standard route for lubricant brands that need capacity without capital expenditure, for companies wanting to produce closer to their export markets, and for businesses whose demand has outgrown their own plant.
At GPL, toll blending runs through the same ISO-certified facility and the same quality control process as our own branded production. Your batch is not treated as a side job.
Toll Blending vs Private Label vs Contract Manufacturing
These three terms get used interchangeably across the industry, and they are not the same thing. This is the difference in practice.
Toll Blending
Private Label
Contract Manufac
turing
Whose formulation
Yours
Usually ours
Yours or developed together
Whose brand
Yours
Yours
Yours
Raw material sourcing
You or us
Us
Us
Scope
Blending, plus packaging if required
Formulation through to finished goods
Full turnkey including sourcing and logistics
Best for
Brands with an established formulation
New brands entering the market
Established brands outsourcing operations
Typical buyer
Existing lubricant company
Distributor or newcomer
Brand scaling up
Toll Blending
Private Label
Contract Manufacturing
Whose formulation
Yours
Usually ours
Yours or developed together
Whose brand
Yours
Yours
Yours
Raw material sourcing
You or us
Us
Us
Scope
Blending, plus packaging if required
Formulation through to finished goods
Full turnkey including sourcing and logistics
Best for
Brands with an established formulation
New brands entering the market
Established brands outsourcing operations
Typical buyer
Existing lubricant company
Distributor or newcomer
Brand scaling up
Not sure which applies? Describe your situation, and we’ll tell you which route fits — including if the honest answer is that another arrangement suits you better.
Your Formulation is yours
The most common concern in toll blending is confidentiality, and it is a fair one. You are handing a formulation to a company that also manufactures its own brands.
A confidentiality agreement is signed before any formulation is disclosed.
Your formulation is not used for our own branded production and is not disclosed to third parties.
You retain full ownership of any formulation you bring to us.
Where we assist in developing or refining a formulation, ownership is agreed in writing before the work begins — not afterwards.
Access is restricted to the production and quality personnel who need it to do the job.
If your legal team has a preferred form of agreement, we are happy to work from it rather than insist on ours.
Plant & Capability
Our facility sits in Hamriyah Free Zone Phase 2, Sharjah — an ISO-certified blending plant producing to API and ACEA specifications, with filling capability across bulk, drum, pail and bottle formats.
Batch sizes are flexible. We run trial batches for specification approval through to full production programmes for container export, and can discuss regular scheduled production for clients with ongoing demand.
Send us the product, specification, volume and packaging requirement, and we will confirm feasibility directly rather than making you work it out from a capability list.
What We Handle
Blending to your specification
- Exact formulation, exact tolerances
Raw material sourcing
- We supply base oil and additives, or you supply your own
Quality control
- Batch testing against your specification before release
Packaging and filling
- Bulk, drum, pail or bottle
Batch documentation
- Certificate of analysis, Technical Data Sheet and Material Safety Data Sheet per run
Storage
- Finished goods held pending shipment
Export documentation and container loading
- Where required
Because we supply, store and distribute base oils as a core business in their own right, raw material procurement is handled in-house rather than subcontracted. That shortens lead times and gives tighter control over consistency between batches.
Quality Control
Every toll blended batch runs through the same quality control process as our own production. Product is tested against your specification before release, and no batch leaves without documentation.
Standard batch documentation includes:
- Certificate of Analysis against your specification
- Technical Data Sheet
- Material Safety Data Sheet
- Batch and lot traceability records
If your market requires additional certification or independent third-party verification, tell us at quotation stage. Building it into the process from the start costs far less than arranging it retrospectively against a shipment already produced.
How It Works
01
Confidentiality & Enquiry
Agreement in place, then you share the specification, volume and packaging requirement.
02
Feasibility & Quotation
We confirm we can produce to your specification in our plant, and issue a costed proposal.
03
Trial Batch
A trial batch is produced and tested against your specification for approval before full production.
04
Production
Full batch blended, quality tested, packed and documented.
05
Release & Dispatch
Batch released against documentation, then stored or loaded for shipment.
Turnaround depends on volume, packaging and raw material availability. We confirm a production schedule at quotation stage, and bulk production does not begin until you have approved a trial batch in writing.
Who Uses Toll Blending
Established lubricant brands needing additional capacity without capital investment
Companies producing closer to export markets — blending in the UAE shortens the route to Africa, South Asia and the CIS
Brands whose own plant is at capacity or offline for maintenance
Businesses testing a new market before committing to their own production
Traders with an established formulation and a buyer, but no manufacturing base
Companies rationalising production — outsourcing lower-volume lines to focus their own plant on core products
Why Blend in Hamriyah Free Zone
- Duty structure favourable for re-export production
- On-site port access at Hamriyah, plus Jebel Ali for global sailing frequency
- Base oil availability — the UAE is a major regional trading hub, which shortens raw material lead times
- Established export corridors across Africa, South Asia, the CIS and the GCC
- Documentation experience across more than 40 destination markets
Discuss Your Requirement
Tell us the product, the specification, the volume and the packaging. We’ll confirm feasibility and come back with a price.
Frequently Asked Questions
What is the minimum batch size for toll blending?
It varies by product and whether packaging is included. Send us your specification and target volume and we’ll confirm what’s workable in a single reply.
Can I supply my own base oil and additives?
Yes. Some clients supply their own additive package while we source base oil, some do the reverse, and some leave sourcing entirely with us. Tell us your preference at enquiry stage.
How do I know my formulation is protected?
A confidentiality agreement is signed before you disclose anything. Your formulation is never used for our own products or shared with third parties, and access is limited to the personnel who need it. If your legal team has a preferred agreement, we’ll work from it.
Do you test the finished product?
Yes. Every batch is quality tested against your specification before release, with a certificate of analysis issued.
Can you package as well as blend?
Yes — bulk, drum, pail or bottle, with labelling where required. See our packaging and filling service.
What if the trial batch doesn't meet specification?
We adjust and re-run until it does. Bulk production does not begin until you’ve approved a trial batch in writing.
Do you hold stock for us?
Yes, storage at Hamriyah is available for finished goods pending shipment. Terms depend on volume and duration and are set out at quotation stage.
What's the difference between toll blending and private label?
In toll blending, you own the formulation, and we provide capacity. In private label, you typically use our formulation and our brand-building infrastructure. See the comparison above.
Can you handle export documentation?
Yes — certificate of origin, packing list and destination-specific paperwork across more than 40 markets.
How is pricing structured?
Pricing reflects the formulation, base oil group, packaging and volume. Base oil is a traded commodity, so quotations account for that and are time-bound. We set out the structure clearly at proposal stage.